Feeds:
Posts
Comments

Posts Tagged ‘pvc’

Tips to choose a cable.
The maximum voltage depends on the material characteristics, the conductor insulation thickness and the outer sheath thickness. The insulation must be sufficiently resistant to prevent even accidental crushing situations, so different uses can have different requirements of project. Norms as UL and CSA (American), IEC (International) and EN (European) set values which are not always equal to each other and sometimes refer only to heavy employment, such as cables for power transmission.Tips to choose a cable
For the transmission of signals inside industrial machinery, it is frequent to use reduced thickness which refers to commercial standards which are not supported by norms, such as cables LiYY and FROR. The advantage of using reduced thickness is particularly evident in the smaller volume occupied by bundles of cables. The reference nominal voltage is generally at least 300 V. On the market there are also low-cost cables in PVC, with extremely reduced thickness, which may not be compatible with the safety standards for specific applications; it is advisable to carefully evaluate the characteristics of the products.The norm IEC 60204-1 (Machinery Safety) recommends the minimum section of the cables according to the application as well, see table 1 on page http://www.shield.net/files/catalogue/support/2.2.pdf . The norm allows smaller sections only if the mechanical protection is sufficiently guaranteed, for example with conduits.

Read Full Post »

Shield switches for hydraulic, pneumatic or electric #cylinders with #magnetic piston. High switching power and sensitivity. Customized circuits available. Shielded or unshielded cables, pvc or halogenfree polyurethane cables. Complete range of mounting accessories.

Read Full Post »

M12 angled round female connector panel connectorsM12 connecteurs, Stecker, connectors, connettori
M8 and M12 with cable

Shield manufacturs #IEC 61076, IEC 60947-5-2 #M8 and M12 circular #connectors, angled or straight, with shielded or unshielded cables, halogen free polyurethane cables, PVC or silicone cables, dynamic or static application; circuits: Led or special circuit available. Ratings up to 4A, 250V. Clean design.

Read Full Post »

These connectors are also called as EN 175301-803, ISO 4400, ISO 6952, ISO 15217 #electrovalve #connectors. They can be made with shielded or unshielded #cables, halogen free polyurethane cables, PVC or silicone cables with dynamic or static application. Ratings up to 10A, 250V. Electronics: custom electronic circuit design available. This connector style is also available as field attachable version, with screw terminals or crimp contacts.
Link to www.shield.net .

connector + connector

VC series electrovalve EN175301-803 DIN 43650 ISO 4400 screw connectors

electrovalve connectors with led

DIN 43650 electrovalve connector

Read Full Post »

7/8" angled connector with cable. HDM Shield series connectors, angled shape, 7/8 inch thread. Poles quantity (from 2 to 14) and many combinations of thread and poles gender offer to the designer a wide range of different connections.Shield manufactures #connectors for industrial #hydraulic, #pneumatic, electrical auto7/8" straight connector with cable. HDL Shield series connectors, straight shape, 7/8 inch thread. With shielded or unshielded   cables. They are usually applied on small motors or distribution   boxes.mation, illumination, trucks and various construction equipments. These photos show 7/8″ circular angled and straight connector series with shielded or unshielded cable. The cable materials can be chosen among a wide choice: halogen free, polyurethane, PVC, silicone, etc. Dynamic or static application. 2, 3, 4, 5, 6, 14 poles.

7/8" frontal assembling receptacle with wires. HDE Shield series receptacles, 7/8 inch thread. Frontal assembling method. Poles quantity (from 2 to 14) and many combinations of thread and poles gender offer to the designer a wide range of connections.

Gender configurations can be: standard male, female and hybrid male-contacts / female-thread, female-contacts / male-thread. Ratings up to 13A, 600V. IP68 over-molded cables. Clean design.
Receptacle can be supplied with frontal or rear assembly method.

 

Read Full Post »

#Distribution #Boxes with IEC 61076-2 standard #M8 and/or #M12SD305 + RDxM distribox. M12 connectors distribution box. sockets are used more and more often in the connectivity industry. They can be applied in many fields such as industrial hydraulic, pneumatic and electrical automation, robot, illumination systems, textile machines, paper machines, trucks, construction equipment, laboratory instruments. Shield distribox + spiderbox. Distribution boxes (pluggable exits)  and spider boxes (direct cable exits) can be used together in the same  industrial machinery or plant.

Standard and custom built-in circuits are available to meet the clients needs. Electronics: special electronic circuit can be included as well. Customized design. IEC, EN. Control devices can be cables, sockets or plugs.Shield. Triple signal connector + distribution box. Available with  M8 and/or M12 connector configuration.

SD305 triple distribution box with M12 connectors.

Read Full Post »

The Spider Box is a modular solution: simple connections or complex bonded junctions according to client’s design can be wired and over-moulded with an efficient cost/quality rate. #Assembly with shielded or unshielded #cables. Up to 20 cables connections with multiple wires can be linked together. Electronics: standard circuit or built-in custom electronic circuits design are available. Hybrid versions with M8 and M12 connectors + direct cable junctions are also available. It’s the solution to reduce the design and cables assembling time in your project.
Some of the main advantages:
– Even a not skilled worker can assemble the machinery electrical parts.
– Easy maintenance for the machinery electrical parts.
– It reduces the stock part numbers.
– Possibility to built-in sophisticated electronic components as well.

 

Shield mixed spider with industrial cable connectors. 3 modules spider splitter with electrovalve, M12 and Phoenix type female connectors.SD3A5N7 Shield hybrid wiring: direct cables + M8 / M12 top mounting sockets. Modular spider splitter. The picture shows a distribution box with 5 blocks.  Shield spider splitter with din43650 electrovalve connectors  Spider splitter

Read Full Post »